Usage Notice
• During first time use, please check if any water leaks from or gathers around the dispenser. If there is any strange noise, burnt smell or smoke coming out from the product, please disconnect the power cord immediately. Contact customer services if you find any of the situations above.
• The power cord of this product uses a three-core plug (the plug has a grounding symbol). The plug must be inserted into a three-core safety socket with a grounding wire. Do not forcefully pull or modify the power cord. If the power cord appears to be damaged, please stop using the product. To avoid risks of danger, the power cord must be replaced by personnel authorised by the manufacturer.
• Please check carefully whether the circuit meets the voltage, power, and other specifications indicated on the nameplate to prevent overloading the circuit before use.
• For first time use or after replacing the filter cartridge, as well as when resuming use after long-term suspension, please clean the water tank and empty the first two tanks of water.
• At any time, do not touch the nozzle of the dispenser to watch out to avoid being burnt by the hot water.
• When light is on, promptly drain the raw water tank and add tap water. To ensure the drinking water stays clean, should clean the water tank daily.
• This product is suitable for tap water from Hong Kong Water Supplies Department with a TDS value less than 500, mineral water, filtered water, etc., but not suitable for well water or high-calcium water with a TDS value exceeding 1500.
• This product cannot be used to heat milk, beverages, or other liquids.
• Do not use accessories which are not authorised by the manufacturer. The warranty will be terminated if dispenser failure is caused by unauthorised accessories.
• Children shall not play with the appliance and shall not be operated by children without supervision.
• Place the dispenser in a cool and dry place, away from direct sunlight. Do not place it near any form of heat sources. The dispenser shall not be placed in an environment that may have inflammable gas leakage.
• When the water temperature or room temperature is low, there may be a brief steam release from the internal rapid heating system when the water boils. This is a normal phenomenon, but it should not be used for facial steaming to avoid scalding from steam.
• Place the dispenser on a cool and stable surface with good ventilation with more than 15 centimetres from dry walls to ensure heat dissipation and to prevent overheating, which may reduce the performance of the dispenser or cause a fire.
• Organic solvent such as gasoline shall not be used for wiping the housing of the dispenser. If cleaning is required, please gently wipe the surface of the product with a wet cloth after it is disconnected from power supply.
• When cleaning the raw water tank and filtered water tank, it is not recommended to use hot water to avoid affecting the taste and quality of the water.
• The hot water temperature is high, so do not use plastic containers to hold it.
• When the removable drip tray is full, remove the tray, pour out the water, and then put it back in place.
• To prevent damage to the dispenser due to water shortage, the dispenser automatically starts the dry-heating protection mode after power-on. The first cup of water may have a lower temperature or an automatic water cut-off situation. This is a normal phenomenon. Simply extract water again to restore normal operation.
• Due to regional, seasonal, and original water temperature variations, the actual water temperature may differ from laboratory data.
• Storage of water in filtered water jug or raw water tank at temperatures above 40°C should be avoided.

Wws 88 Ro Hot & Ambient Water Dispenser